Payment & Shipping Terms:
|Designed Capacity:||60Ton||Wheel Base:||1310 (mm)|
|Tyre Setting:||10.00R20 / 12||King Pin Config:||2’ & 3.5’|
|Tare Weight:||8 Ton||Ramp Qty:||2|
heavy equipment trailer,
heavy equipment flatbed trailers
Drop Deck Heavy Duty Flatbed Trailer , 8 Ton Heavy Load Trailer Dual Hydraulic Ramps
• Core Application
Drop deck heavy equipment transport trailer can load oversize and overweight cargoes. The basic type of heavy-duty trailer is single flatbed trailer which is equipped with the connector transferring the horizontal and vertical stress to the tractor. A variety of drop deck structures are used to lower the bearing surface and meet the demand of transporting various goods.
• Flexibility and Steadiness
The trailer has competitive edges below: the height of the cargo bed is changeable; the radius of turning circle is small; the backing is convenient; the trailer body can be adjusted to keep the balance and the steadiness of goods when the trailer is running downhill or uphill.
• Passing Ability
The axle goes through the frame to effectively reduce the ground clearance of the cargo bed and the load of each one is even. The increscent passing ability can load goods with large diameter.
• Special Processing
Pin roll of each joint part is made of alloy steel and is subjected to a special processing technique.
• Hydraulic Ramps
Dual hydraulic ramps are installed at the rear end of the trailer to help the transported vehicle move onto or leave the cargo bed by the power itself. The application of hydraulic ramps automates the retractile system and solves the manual management.
|Tare Weight||About 8 Ton|
|Max Loading Capacity||60Ton|
|Wheel Base||1310 (mm)|
|Tyre Specifications||10.00R20 / 12|
|King Pin||2’ & 3.5’ changeable|
|Landing Leg||28ton with 80Tons static capacity|
|Pieces of Leaf-Spring||10pcs|
|Suspension||Heavy Duty Leaf Spring|
Q345B manganese plates,
automatic submerged arc welded;
Height 500mm , through cross beams Q235;
Floor, 3mm management plate
|Brake System||Dual line braking system with automatic air chambers|
Contact Person: Jenny