Payment & Shipping Terms:
|Container Shape:||V Shape||Tank Volume:||30cbm - 60cbm|
|Engine Power:||40 KW||Axle Setting:||3 Axles, Brand: BPW 12 Ton|
|Tyre Spec:||9.00R20||Manhole Cover:||500mm, 2 Sets|
pneumatic bulk trailer,
dry bulk cement trailers
Large Capacity Dry Bulk Trailer 3 Ton Heavy Load Double V Shape Environmentally Friendly
• Core Application
Dry bulk tank trailers are used on construction sites to transport powdered materials with physical properties similar to coal ash. The working principle is to send the compressed air into the air chamber in the lower part of the sealed tank through the pipeline so that the powder particles in the liquid bed of the air chamber can be suspended in a flow state. When the pressure in the tank reaches the rated value, the discharge valve is opened, and the fluidized material flows through the pipe.
• Rapid Unloading
This model has three axes, a double v-shaped design, and a partition board in the middle. Hence, two kinds of dry powders can be transported and stored. The car is equipped with a series of unloading equipments such as an air compressor, which is time-saving and efficient.
• Large Capacity, Heavy Load
The double V-shaped bulk cement trailer has a larger internal space and a higher load than ordinary cement trailers. It can transport and store more dry powder. Less vehicles are needed to transport more cargoes.
• Environmentally Friendly
In the loading and unloading process, dust will not be generated to pollute the environment. Bags for packaging cement are useless so the waste of resources is avoided.
• Quality Assurance
Paint sprayed on the inside of the tank is good for the long journey of dry powder. The quality of the goods will not be affected by external substances.
|Main Dimensions||Overall Width||2500mm|
|Tank Volume||30cbm - 60cbm|
|Tare Weight||30000 kgs|
|Loading Capacity||28000 kgs|
|Axles||3 axles, Brand: BPW 12 ton|
|Manhole Cover||500mm, 2 sets|
|Engine||Weichai Diesel Engine 40 KW|
|Air Compressor||33 KW, 0.2MPa, 1000r/min|
|Suspension||German design suspension, 13-pcs leaf spring|
2”main hole, 2” check valve,
1.5” safety valve, 0.4 MPa gauge
|Discharge Pipe||4” seamless steel tube|
|Braking System||WABCO relay valve; T30/30 Spring air chamber|
Contact Person: Jenny