Payment & Shipping Terms:
|Vehicle Dimension:||13000x3000x1550 Mm||Axle Producer And Qty:||13 Ton , FUWA Brand , 3 Units|
|Tyre And Quantity:||1100R20 , 12 Units||Maximum Capacity:||100,000 Kg|
|Braking Chamber Type:||6 Double Air Chamber||Steel Spring Spec:||-10/10/10 Leaf Spring Suspension|
heavy equipment trailer,
heavy equipment flatbed trailers
Widener Trailer Low Bed Trailer Anti-skid Widened Plate Carbon Steel
• Main Application
The low bed trailer can transport inseparable facilities used in the industrial field like civil engineering, energy engineering, and mechanical engineering. This widener trailer is an update of the low bed trailer. The working platform can be widened into 3.5M by the hyraulic system.
• Lightening Holes
The height of the main beam and the frame is the same. Lightening holes are punched to greatly decrease the unnecessary dead load in the crossbeam.
• Antiskid and Wear-Resistant
The low bed is welded by 4mm diamond plate which is non-slip and wear-resistant. Thus, the bed is thick and durable.
The Hydraulic System
The hydraulic system is used to extend the trailer in both sides. It is powered by an independent power unit, norally it is small disiel engine.
• Widened Plate and Low Bed
The low bed is produced by widened plate to enlarge the area for loading over-wide devices. The ground clearance of the bed is lower than common flatbed trailer.
• Vehicle Protection
Welded connection is applied to the protection of left and right side. The rear protection is integrated into the vehicle.
• Lock Ring
Lock ring is installed under the both sides of the bed. Ropes can be used to fix the instable cargo.
• Automatic Production
The manual job and time can be reduced. Meanwhile, the damage to the goods and cost of handling operation can be decreased.
|Overall Dimension||13000x3000x1550 mm|
|Curb Weight||9000 kg|
|Loading Capacity||100,000 kg|
|Axle Brand and Number||13 ton , FUWA brand , 3 units|
|Kingpin||2 inch (50mm) or 3.5 inch (90mm)|
|Landing Gear||28 ton, JOST brand , Double speed|
|Steel Spring||-10/10/10 leaf spring suspension|
|Suspension System||Common mechanical suspension|
|The Main Beam||
The height of the beam is 500mm;
upper plate is 16 mm;
down plate is 18mm;
middle plate is 10 mm
|Tyre and Quantity||1100R20 , 12 units|
|Platform Plate||4 mm diamond plate|
|Braking System||Dual line braking system|
|Braking Chamber||6 double air chamber|
|Tool Box||1 set|
|Spare Tire Carrier||2 sets|
Contact Person: Jenny