Three Tips for Repairing Tire Puncture Quickly
First aid type: gunshot repair. The common way to repair a tire is to insert special glue bar into the hole in the tire. The mending shop's master usually calls it gunshot mending. The best advantage of this method is that it is fast and convenient, and only takes a few minutes. And there's no need to take the tire off the rim. But gunshot repair is not durable enough, and there is a large wound that is hard to deal with. Therefore,it can only be used as a temporary measure.
Plugging type: paste repair. The so-called paste repair is to remove the injured tire from the steel rim, find the wound, from the inner layer of the tire to paste a special tire rubber, so as to complete the repair. The advantage of this method is that it can repair large wounds, but the disadvantage is still not durable enough. After a period of water immersion and high-speed operation, air leakage will occur again at the repair site.
Terminal type: fire repair. Fire repair also involves taking off the tire and attaching special sheet rubber to the wound. Then bake the wound with a baking machine until the sheet rubber fits the tire completely. The advantage of fire repair is that is very durable, no need to worry about repeated leakage.But it also has disadvantages,that is needing higher technical requirements. Because if baking temperature is not well controlled, the tire might be scorched, and even distor, the damage to tires can be serious.
Professionals point out that there are many ways to mend a tire, but they are not omnipotent. If there is a wound greater than 1 cm in the tire wall, or if the crown is pierced by objects such as steel bars, the best way is to replace a new tire. Because the tire is hard to repair and the effect after mending is not reassuring.
Contact Person: Ms. Jenny