Payment & Shipping Terms:
|Container Shape:||V Shape||Amount Of Axle:||3|
|Vessel Body:||Q235A/6mm Steel Sheet||Body Volume:||60 Tons|
|Tire Config:||11.00R20, 12.00R20, 11R22.5, 12R22.5, 315/80R22.5 For Option||Color:||Red|
pneumatic bulk trailer,
dry bulk cement trailers
V Shape Pneumatic Tanker Trailer Inner Anti - Corrosion Small Discharge Loss
• Core Application
V shape dry bulk tank trailer fits for bulk transportation of building materials, metal powder, coal combustion products etc. Usually, it finishes transportation tasks assigned by building enterprises.
• V Shape
This product is configured with three axes. The V shape of the tank structure has a lot of notable characteristics: low gravity center, superior balance, fast loading and unloading etc.
• Long Life Cycle
The anti-corrosion coating on the inner wall and anti-rust paint on the outer wall perfectly protects the tank. Thus, the life cycle of the tank is prolonged.
• Quality Assurance
The quality of the trailer is on the basis of the durable steel plate, firm welding technology, and strict quality evaluation.
• Small Discharge Loss
Our trailer is equipped with a fluidized belt inside that can be used with an air compressor to efficiently unload powder with a small amount of residue. Accordingly, cement loss can be diminished.
• Protect the Quality of Cement
Special containers are adopted during transportation and storage. It is not easy to get wet and cement can be stored for a long time without deterioration.
|Overall Size||12500mm x 2500mm x 3800mm|
|Tank Body||Q235A/6mm steel sheet|
|End Plate||Q235A/6mm ball shape|
|Axle||13T/16T capacity, FUWA / BPW Brand|
|Suspension||Mechanical suspension or air suspension|
|Leaf Spring||Leaf spring or air bag|
|Tire||11.00R20, 12.00R20, 11R22.5, 12R22.5, 315/80R22.5 for option|
|Wheel Rim||Optional range: 8.5-20, 9.0-20, 8.25-22.5, 9.0-22.5 steel wheel rim|
|Discharge Pipe||4" seamless steel tube|
|Engine||Diesel engine or electrical motor|
|Air Compressor||37Kw, 0.2Mpa.1000r/min|
|Kingpin||2’’/3.5’’ bolt-in king pin|
|Landing Gear||JOST brand two-speed, manual operating, heavy duty landing gear|
|Air-charging System||2 main hole, 2check valve, 1.5" safe valve, 0.4Mpa guage|
|Outlet Discharge Pipe||4" rubber hose 6m|
|Braking System||WABCO RE6 relay valve; T30/30 spring brake chamber; 40L air tanks|
Complete chassis sand blasting to clean rust;
1 coat of anti-corrosive prime;
2 coat of final paint
|Accessories||One standard tool box|
Contact Person: Jenny