Payment & Shipping Terms:
|Metallic Material:||Aluminum Alloy 5454||Overall Size:||11800 X 2490 X 3800 Mm|
|Capacity:||44 CBM||King Pin:||JOST 2", Bolt On Type|
|Rim:||11.75-22.5, 6 Units||Painting:||Mirror Surface|
• Lightweight Design
Aluminum alloy fuel trailers are designed with aluminum alloy which has the characteristics like light weight, good electrical conductivity, strong corrosion resistance, and easy processing. The total tare weight of aluminum alloy fuel tank trailer is 1/3 less than the carbon steel fuel tank trailer based on the same specification. Normally the aluminum alloy tank does not need to be coated on the surface, which already shows good gloss on surface.
• Tank Parts
This aluminum fuel tank trailer adopts the American brand OPW/CIVOCAN tank parts, which is one of the top suppliers in the tank parts area. The tank parts mainly includes the manhole cover, bottom valve, standard API discharge valve, oil gas recovery valve, gas vent valve, anti-flow optical sensor, control board for bottom valve, emergency cut bottom, etc.
The top quality whole set of tank parts ensure the fluent and easy operation of the fuel tank. All these tank parts are made by aluminum alloy.
• DOT Standard
This tank is designed and made according to DOT standard which ensures high safety level.
• Good Quality
Our company is committed to the development and research of aluminum alloy fuel tanks. Our technical staff have rich experience on production, so our products are produced with advanced technology and reliable quality.
Aluminum alloy has good electrical conductivity. Thus, static electricity is not easy to happen. Sparks are not generated when vehicles collide.
• Neat and Beautiful Surface
The mirror surface looks beautiful and neat. Smooth surface is free from dust, easy to clean and do not need to spray paint.
• Long Service Life
There is a dense oxide film on the surface of aluminum alloy, which is anti-corrosion. Additional anti-corrosion treatment is needless. The service life is at least 10 years.
|Overall Size||11800 x 2490 x 3800 mm|
6 mm aluminum alloy 5454 in tank;
6 mm tank end plate;
with walkway and pneumatic operation hand rail on the top of the tank
|Axle||12 ton BPW brand, 3 units|
|Suspension||Air suspension, with lift device on front axle|
|King Pin||JOST 2", bolt on type|
|Landing Gear||JOST 28 ton, two speeds|
|Tire||Hankook 365/65R22.5, 6 units|
|Rim||Aluminum alloy, 11.75-22.5, 6 units|
Wabco relay valve;
30/30 double brake chambers on rear axle;
30 single chambers on other axles
|Electrical System||Dual circuit, 7-way split pin receptacle plug, LED light|
|Painting||Mirror surface around tank|
|Mudguard||Plastic or steel|
|Others||1 tool box, 1 wheel carrier, excluding spare wheel|
One manhole each compartment;
Europe or USA manhole and API valve;
Vapor recovery equipment